How to choose the suitable reducer, reducer on the market so much how to choose a brand, then, first gear reducer of the type you want you to determine, and then determine the torque input power and output need, according to the speed of the input shaft and the output shaft speed to calculate the speed reducer. According to the actual use, such as daily working hours, impact load, switching frequency, etc., to determine the working condition coefficient. When calculating the type, specification and speed ratio of the reducer, and roughly understanding the type of reducer, choose the brand and determine the parameters of the reducer after communicating with the manufacturer.

After through various channels to collect good data to the reducer, choose a good brand and manufacturers, manufacturers get the address and contact information, directly to their communication, tell your own requirements, this is one of the most direct method is the best. Through communication, let the factory as soon as possible to know your requirements, you also want to own more clearly what kind of reducer, such as universal or non-standard, other manufacturers will provide electronic samples for each type of samples, there are steps, selection and matching of reducer in general, can refer to some the selection of the following information.

What 1. reducer used in equipment, in order to determine the safety coefficient of SF (SF= reducer rated power by motor power), the installation form (orthogonal axes, parallel shaft, output hollow shaft key, output hollow shaft locking plate, etc.).

2. provide motor power, series (4P, 6P, or 8P motors);

3. the ambient temperature of the reducer (check the heat power of the reducer);

Checking the radial force and axial force of the output shaft of the 4. reducer. To provide axial force and radial force, it is better to find a sample, and then reference.

Here to Jie reminder in particular, we should pay attention to the daily maintenance of reducer in the future to choose a suitable reducer in the process of daily use. In particular, the speed reducer should be cleaned regularly. The gear box cleaning machine with gear box to drain and the old oil filter can be realized after cleaning, waste oil on the gear box of the rapid filtration, adding new oil and other functions of the original operation process does not change the hardware facilities, do not add cleaning agent, to ensure the safe operation of the gear box, it can prolong the life of gear reducer well, better maintenance of reducer.